2V0-41.23 Online Practice Questions

Explanation:
To allow syslog on an ESXi transport node, the administrator needs to use the esxcli utility to enable the syslog ruleset in the ESXi firewall. The correct syntax for this command is esxcli network firewall ruleset set -r syslog -e true, where -r specifies the ruleset name and -e specifies whether to enable or disable it. The other options are incorrect because they either use an invalid syntax, such as omitting the ruleset name or using -a instead of -r, or they disable the syslog ruleset instead of enabling it, which is the opposite of what the question asks. References: [ESXi Firewall Command-Line Interface], [Configure Syslog on ESXi Hosts]

Explanation:
https://docs.vmware.com/en/VMware-NSX-Intelligence/4.0/user-guide/GUID-DC78552B-2CC4-410D-A6C9-3FE0DCEE545B.html

Explanation:
NSX Global Manager is a feature of NSX that allows managing multiple NSX domains across different sites or clouds from a single pane of glass. NSX Global Manager supports Federation, which is a capability that enables synchronizing configuration and policy across multiple NSX domains. Federation has many benefits such as simplifying operations, improving resiliency, and enabling disaster recovery.
The only supported mode in NSX Global Manager when using Federation is Policy mode. Policy mode means that NSX Global Manager acts as a policy manager that defines and distributes global policies to local NSX managers in different domains. Policy mode also allows local NSX managers to have their own local policies that can override or merge with global policies. https://docs.vmware.com/en/VMware-NSX/4.0/administration/GUID-29998FC5-C1AB-40BC-B669-6E8E9937F345.html

Explanation:
According to the VMware NSX 4.x Professional documents and tutorials, a RouterLink port is a logical port that connects a Tier-1 gateway to a Tier-0 gateway. This port is automatically created when a Tier-1 gateway is associated with a Tier-0 gateway from the NSX UI or API. The RouterLink port enables routing between the two gateways and carries all the routing protocols and traffic. There is no need to manually create a logical switch or segment for this purpose1.

Explanation:
To check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node, an NSX administrator can use the following commands:
esxcli network ip interface ipv4 get: This command displays the IPv4 configuration of all VMkernel interfaces on the host, including their IP addresses, netmasks, and gateways. The Geneve protocol uses a VMkernel interface named geneve0 by default1
esxcfg-vmknic -l: This command lists all VMkernel interfaces on the host, along with their MAC addresses, MTU, and netstack. The Geneve protocol uses a netstack named nsx-overlay by default
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/installation/GUID-B7E7371E-A9F6-4880-B184-E00A62C0C818.html https://www.vmadmin.co.uk/resources/35-esxserver/49-vmkniccmd